Your cart is currently empty
Product image slideshow Items
Pelican sears will only work for these micro adjustable releases – Coop Pro, Infinity Pro, Tanjent, BGPRO and GHOSTBG.
Adjustment Instructions Travel Adjustment
To micro adjust the sear, loosen set screw in Fig. 2 and tighten set screw in Fig. 3 for less travel.
To micro adjust the sear, loosen set screw in Fig. 3 and tighten set screw in Fig. 2 for more travel.
Set screw in Fig. 1 is an optional sear lock. If
you lock this down you cannot adjust the sear.
Do not overtighten.
Please test after any adjustment.
Changing Sears
To change sear, loosen all three set screws (see Fig.1, Fig. 2, Fig. 3) and back out the flat head screw (see Fig. 4).
Next, change your sear and re-install the flat
head screw (see Fig. 4).
3. Now, make necessary adjustments and re-tighten set screws (see Fig.2, Fig.3).
4. Use hot sear for less travel and cold sear for more travel.
Do not overtighten.
Please test after any adjustment.
To Change Finger Locations and/or Arms
Remove the 6-32 x 3/8 screw.
Move finger piece to desired location and re-tighten the 6-32 x 3/8 screw.
Do not overtighten.
Please test after any adjustment